We use cookies to enhance your experience. By continuing to browse this site you agree to our use of cookies. More info.
This article presents a thorough analysis of microwave nondestructive testing, its advantages, and various techniques.
Image Credit: Audrius Merfeldas/Shutterstock.com
Non-destructive analysis is testing or assessing the soundness of a material or structure for surface or internal flaws or biomechanical parameters without jeopardizing the component's or molecule's deterioration or suitability for function. There are numerous methods for assessing parts and systems based on their deployment stage.
Non-Destructive Evaluation (NDE) or Non-Destructive Testing (NDT) is the identification and characterization of faults or defects on the outside and inside of elements without slashing or otherwise altering the composition. In other words, NDT is the process of analyzing and examining materials/components to describe or find flaws in reference to certain criteria without affecting normal characteristics or harming the object being investigated.
NDT process enables or provides a cost-effective means of evaluating a specimen for independent study and examination, or they may be used to verify the complete molecule in a production-quality management process.
In many cases, the procedure to find a deficit requires the use of more than one NDT method. It might need several methods as well as exploratory, intrusive procedures. The efficacy of the assessment is dependent on a better understanding of the origins, advantages, and limits of each NDT technique.
Mastering a single NDT method may not be enough to ensure efficacy in resolving the issue at hand. In the assessment of manufactured systems, a broad range of non-destructive testing methods is critical. Manufacturing, electronic parts, pipeline and cylindrical production, warehousing facilities, aerospace, armed forces, and spaceflight, nuclear industry, and composites flaw characterization are only a few of the industries/ areas that use composite NDT.
Further Reading: Non-Destructive Testing of Computer Components
Microwave nondestructive testing (MNDT) of substances is an essential discipline that includes the creation of sensors/probes, procedures, and calibration techniques for detecting flaws, fractures, faults, vacancies, heterogeneity, moisture levels, and other problems using microwaves.
Microwave inspection can be done in two ways: a reflection phase or transmission phase. The microwave information is passed through the element in the sample in reflection mode. The microstructural reflection of the substance is gathered and evaluated in terms of amplitude and/or aspect characteristics.
Transmission mode, on the other hand, employs a probe to send the radio wave from one side of the specimen and another sensor to receive the data from the other half. Reflection coefficients, propagation correlation coefficient, dielectric properties, loss coefficients, and complicated porosity and permeability as a function of the frequency (microwaves) and temperatures are the characteristics determined by MNDT procedures. By using appropriate modeling and validation, these observed characteristics may be connected to material properties of relevance.
Microwave Nondestructive Testing (MNDT) approaches have benefits over other NDT techniques (such as radiography, ultrasonic testing, and eddy current) in terms of cost reduction, better penetration in organic or inorganic substances, high resolution, and the microwave sensor's capacitive characteristic (antenna).
Due to the non-contact characteristic of free-space measurement techniques, it is possible to make accurate, reliable, and repeatable MNDT readings on composites under high or low ambient temperature and complicated electrostatic environmental factors (e. g., DC biassing fields, ionizing radiation, etc.) with appropriate adjustment. It is increasingly being utilized for quality management and assessing the state of concrete constructions. Recently, the MNDT approach has been employed to quantify the slope-of-grain of timber for grading purposes.
A major microwave NDT technique is the Chipless Radio-Frequency Identification (RFID) Sensor System. It is being researched for use in structural health monitoring (SHM) technologies. A sensing label is used for a metal construction that is being investigated. The sensor reader communicates with the sensing tags by sending a bandwidth pulse through the transmitters.
Guided Microwave Testing (GMT) is another approach utilized to explore the pipeline's expanded lengths. The electromagnetic wave will be emitted by the transmitters through a sensing wire during GMT. The microwave signal will strike the liquid's interface and be reradiated to the sensor, then to the transmitter’s enclosure.
The microwave transmission line sensor is one of the transmission lines used in microwave NDT. The materials that have been inspected will serve as superconductors for the microwave circuitry. The substance permeability will alter if and only if the components include flaws.
The replies of the impulses will be returned in order to identify the position and extent of the flaws. Another technique is microwave open-ended wavefront imaging. In microwave open-ended waveguide scanning, two types of sensors are used: open-ended coaxial sensors and open-ended rectangular broadband sensors.
The most common are open-ended coaxial sensors. However, with a maximum operating frequency of 50 GHz, numerous coaxial sensors of varying diameters may be chosen. Ground-penetrating radar (GPR) is a non-destructive testing (NDT) subsurface imaging technology approach in which an incident electromagnetic wave transmits through the substance under inquiry.
Couple spiral inductors (CSI) are another type of specialized probe that is widely used in microwave non-destructive testing. These are made up of two spiral coupled inductors formed by essential and auxiliary circuits. The measuring of the transmitted power from the second winding to the primary coil is the concept used in this sensor.
Microwave non-destructive testing has a few drawbacks along with its various advantages. The morphology of an element can occasionally alter the sensitivity of examination. External electric and magnetic fields can significantly affect the accuracy of the results.
In addition, the extensive setup and additional sensors might raise the overall cost of the operation. Furthermore, microwave technologies have several limitations in material inspection, including lower resolution quality images, fuzzy fault morphology, and complex data analysis. Despite these limitations, it is one of the most researched techniques all over the world, especially in the civil engineering, structural engineering, and sensing fields.
In short, microwave NDT techniques are paving the way for novel evaluation methods, but a lot of research is required to overcome their shortcomings.
Ghodgaonkar, D. K. & Ali, N. A., 2022. Microwave Nondestructive Testing of Composite Materials using Free-Space Microwave Measurement Techniques. [Online] Available at: https://www.ndt.net/article/wcndt00/papers/idn251/idn251.htm
Sobkiewicz, P., Bieńkowski, P. & Błażejewsk, W., 2021. Microwave defectoscopy – detection of composite delamination. Journal of Physics: Conference Series, Volume 1782. 012034. Avalable at: https://iopscience.iop.org/article/10.1088/1742-6596/1782/1/012034
Wahab, A. et al., 2019. Review on microwave nondestructive testing techniques and its applications in concrete technology. Construction and Building Materials, Volume 209, pp. 135-146. http://eprints.utm.my/id/eprint/87980/
Wang, X. et al., 2022. Microwave detection with various sensitive materials for humidity sensing. Sensors and Actuators B: Chemical, Volume 351. 130935. Available at: https://www.sciencedirect.com/science/article/pii/S0925400521015033?via%3Dihub
Disclaimer: The views expressed here are those of the author expressed in their private capacity and do not necessarily represent the views of AZoM.com Limited T/A AZoNetwork the owner and operator of this website. This disclaimer forms part of the Terms and conditions of use of this website.
Ibtisam graduated from the Institute of Space Technology, Islamabad with a B.S. in Aerospace Engineering. During his academic career, he has worked on several research projects and has successfully managed several co-curricular events such as the International World Space Week and the International Conference on Aerospace Engineering. Having won an English prose competition during his undergraduate degree, Ibtisam has always been keenly interested in research, writing, and editing. Soon after his graduation, he joined AzoNetwork as a freelancer to sharpen his skills. Ibtisam loves to travel, especially visiting the countryside. He has always been a sports fan and loves to watch tennis, soccer, and cricket. Born in Pakistan, Ibtisam one day hopes to travel all over the world.
Please use one of the following formats to cite this article in your essay, paper or report:
Abbasi, Ibtisam. (2022, February 02). An Overview of Microwave Nondestructive Testing. AZoM. Retrieved on July 29, 2022 from https://www.azom.com/article.aspx?ArticleID=21293.
Abbasi, Ibtisam. "An Overview of Microwave Nondestructive Testing". AZoM. 29 July 2022. <https://www.azom.com/article.aspx?ArticleID=21293>.
Abbasi, Ibtisam. "An Overview of Microwave Nondestructive Testing". AZoM. https://www.azom.com/article.aspx?ArticleID=21293. (accessed July 29, 2022).
Abbasi, Ibtisam. 2022. An Overview of Microwave Nondestructive Testing. AZoM, viewed 29 July 2022, https://www.azom.com/article.aspx?ArticleID=21293.
Do you have a review, update or anything you would like to add to this article?
At the Advanced Materials Show 2022, AZoM caught up with the CEO of Cambridge Smart Plastics, Andrew Terentjev. In this interview, we discuss the company's novel technologies and how they could revolutionize how we think about plastics.
At the Advanced Materials Show in June 2022, AZoM spoke with Ben Melrose from International Syalons about the advanced materials market, Industry 4.0, and efforts to move toward net-zero.
At the Advanced Materials Show, AZoM spoke with Vig Sherrill from General Graphene about the future of graphene and how their novel production technique will lower costs to open up a whole new world of applications in the future.
Discover the OTT Parsivel², a laser disdrometer that can be used to measure all precipitation types. It allows users to collect data on the size and speed of falling particles.
Environics offers stand alone permeation systems that can be used for single or multiple disposable permeation tubes.
Grabner Instruments’ MiniFlash FPA Vision Autosampler is a 12-position autosampler. It is an automated accessory designed to be used with the MINIFLASH FP Vision Analyzer.
This article provides an end-of-life assessment of lithium-ion batteries, focusing on the recycling of an ever-growing amount of spent Li-Ion batteries in order to work toward a sustainable and circular approach to battery use and reuse.
Corrosion is the degradation of an alloy caused by its exposure to the environment. Corrosion deterioration of metallic alloys exposed to the atmosphere or other adverse conditions is prevented using a variety of techniques.
Due to the ever-increasing demand for energy, the demand for nuclear fuel has also increased, which has further created a significant increase in the requirement for post-irradiation examination (PIE) techniques.
AZoM.com - An AZoNetwork Site
Owned and operated by AZoNetwork, © 2000-2022