Test Equipment: Salt Spray (or Salt Fog) Corrosion Test Chamber
Applicable Standards: Various standards, e,g, ASTM B117, ISO9227, JIS H8502, etc.
Applications: Salt spray chambers are used to check corrosion (rust or other oxides) resistance of materials and surface coating, painting, electroplating in condition of salt spray environment. Salt spray testing is an accelerated corrosion test that produces a corrosive attack to coated samples in order to evaluate the suitability of the coating for use as a protective finish.
Specification/Features:
Applicable Standards: Various standards, e,g, ASTM B117, ISO9227, JIS H8502, etc.
Applications: Salt spray chambers are used to check corrosion (rust or other oxides) resistance of materials and surface coating, painting, electroplating in condition of salt spray environment. Salt spray testing is an accelerated corrosion test that produces a corrosive attack to coated samples in order to evaluate the suitability of the coating for use as a protective finish.
Specification/Features:
| Model | S-150 | S-250 | S-750 | S-010 | S-016 | S-020 | |||
| Internal dimensions (mm) | 470*590*400 | 640*1000*500 | 750*1100*500 | 1000*1300*600 | 900*1600*720 | 1000*2000*800 | |||
| Overall dimensions (mm) | 620*1400*1050 | 810*1800*1180 | 920*1900*1200 | 1200*2200*1400 | 1300*2500*1600 | 1420*3000*185 | |||
| Temperature range | Ambient ~60ºC | ||||||||
| Humidity range | 95% ~ 98% RH | ||||||||
| Temperature fluctuations | +/- 0.5 ºC | ||||||||
| Temperature deviation: | +/- 2.0 ºC | ||||||||
| Test time | 1~999 hours, settable | ||||||||
| Spray deposition | 1~2ml / 80cm2 · h | ||||||||
| Spray type | Continuous / Periodic | ||||||||
| Temperature Controller | LED display, P.I.D+S.S.R. microcomputer integrated controller | ||||||||
| Salt fog collected | Fog collector and fog measure cylinder | ||||||||
| Salt water preheating | Saturated air barrel | ||||||||
| Spraying system | Atomizer tower and Spray nozzles (Fog is more fine and uniform distribution) | ||||||||
| Interior /Exterior material | Glass fiber reinforced plastics | ||||||||
| safety device | Humidifier dry-combustion protection, over-temperature protection, water shortage protection, over current protection, earth leakage protection | ||||||||
| Standard | ISO 3768/3769/3770, DIN50021-75, ASTM B-117, JIS H8502, IEC 68-2-11,IEC68-2-52, MIL-STD-750, ISO 9227 | ||||||||
| Power Supply | AC220V 50HZ | AC220V 50HZ | AC220V 50HZ | AC380V 50HZ | AC380V 50HZ | ||||